Bias Ply tire options for 1969 Camaro

[x33rs]

Any closer pics??

That offset is going to be sketchy for me. With 255/60-15's on the back and the original YH's with 4.25" back space, I can barely even get my finger between the inside wheel lip and the sidewall of the tire on both sides of the car.
If I move the wheels out a 1/2 inch, I'm almost certain it's going to rub, especially with groceries in the trunk, or turning into any kind of odd angle driveway that tilts the rearend. It's the section width of the tire (the side wall) that is going to be an issue on mine. If I could post pictures I would.

So I'm real curious what you have for room in there..

I'm thinking to make that work on my Z, I'd have to take the 255's off and go back to a 215/70-15 tire that mimics the original E70-15 size, and get rid of some of the section width of the sidewall. I'm not opposed to doing that as I'd like to be able to rotate the tires, but I'll have to wear out these 255's first.

[x33rs]

I also see you went with the lighter colored centers. Is that more acceptable for the day 2 stuff?

I was torn between the darker center or the lighter center. Both were the same price.