"The Beater Bee" becomes "The Better Bee"

[A12pilot]

Thanks guys! Sorry for the delay on the reply. That whole work thing getting in the way again, Mike [img]<<GRAEMLIN_URL>>/thumbsdown.gif[/img] But vacation is underway and it's time to get some bodywork done! First step, body line rebuild!


I started by taping off the dull remnants of the factory stamping. I then used some body glaze and tapered a very slight skim coat across the tape. Removing the tape revealed a very small ridge which I knocked down with 180. This is a very small amount of glaze. Just enough to get that crisp line back!

Cheers [img]<<GRAEMLIN_URL>>/beers.gif[/img]