LS6 cam or Modern equiv in SS454 Monte

[aaronkl84corvett]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VintageMusclecar</div><div class="ubbcode-body">(*edited* info re: intake)

If an aftermarket intake is an option, there's the Edelbrock Performer, Performer RPM and the GMPP oval port 12363420 intake. All have temp sender provisions and will accept a Quadrajet, and if the OEM look is a must, a little orange paint goes a long way.

Stamped steel rockers will be fine with a mild hydraulic roller. </div></div>


well, i'm more concerned about having factory parts - and there were several 427-390 hp intakes that I could use.

but is that 3/4- 1 point of compression worth the headache by switching heads and all if i'm gonna go with a modern hyd roller cam?