Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
02-02-2016, 06:49 PM
|
|||
|
|||
Re: A/M Headers flange
Dave -- I wouldn't think tet round collector would pose a problem. The collector is probably 3 or 3.5 inches and three or four bolts. The sealing surface must is still inside the collector mounting bolt holes. TAZ
__________________
You've never lived until you've almost died -- for those who fight for it, life has a flavor the protected will never know! 
|
|
#2
02-02-2016, 07:12 PM
|
||||
|
||||
|
Re: A/M Headers flange
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: earntaz</div><div class="ubbcode-body">Dave -- I wouldn't think tet round collector would pose a problem. The collector is probably 3 or 3.5 inches and three or four bolts. The sealing surface must is still inside the collector mounting bolt holes. TAZ</div></div>
So as long as I can pull the two sides together on a header gasket I should be good to go. That makes sense. So you think $100 is worth it? Seems like it. Dents are pretty easy to get out.
__________________
-Dave Semper Fi! 69 Camaro SS396 L34 X66
|
 |
|
|
Hybrid Mode
