70 Nova lower windshield molding install

[novab]

Does anyone have any advice on when to install the lower windshield molding on a 70 Nova. Is it best to install before the fenders go on, or is after ok. If I remember correctly the outer clip is harder to get on with fenders installed.

[m22mike]

I know a 69 outer clip is different, 69 Camaro/Nova lower molding can go on and off anytime. I was asked to help a friend remove and replace the lower molding on a 70 Nova and I could not access those outer clips ?
Someone here should know more about this ? Here is a 69 clip that you can gain access to anytime with the door open from inside.

[novab]

ok thanks maybe someone else can chime in. My clips rap around different than those.

[BJCHEV396]

Think you have to take off the cowl vent grill.

[L78steve]

Don't know about 69 But 70 like the pic. above needs to be installed before the fender.
Don't ask me how I know this.
If someone knows how to get in there with the fender installed I would be interested as to how.

[m22mike]

The picture above is a 69 and it can be accessed with the fender on, done it many times, it is the 70 that is a problem.

[LIBoomer]

Bob,
You answered your own question. While the outer clip attaching bolt is easy to get at,(in the door jamb)sneaking the clip/moulding around the corner and between the glass and fender is difficult. If you are working with a freshly painted car I would not attempt it. Install all your windshield trim first then cowl panel/fenders.

[novab]

Thanks for all the input. I will install before the fenders go on. Its nice to have a group of people share all their knowledge to help others.