Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#3
05-21-2015, 12:14 PM
|
||||
|
||||
Re: Dust Covers
Big
I just used a repop set on my Malibu I have been working on. I was doing plating anyway, so I striped off the bright zinc in phosphoric acid and had them cad plated. They are toned way down, not shiny at all. I can shoot you a couple pic's if you want. There on the car. Or, give them a quick dunk in the acid and rinse and inspect, repeat as need. That will dull them up a bit. #3, strip the zinc, there will be a nice phosphoros coating on the steel, blow off with a air gun and a damp towell, force dry or hang in the sun ( you may have to go to AZ.) then treat with Rpm and leave the bare ? Prep and Etch 
|
|
|
Threaded Mode