FEW MORE GM MANUALS INCLUDING 71 RADIO MANUAL

[marxjunk]

US address and paypal only...complete in 24 hrs after confirmation or i move on

I have double of some GM manuals..each priced individually...shipping ranges from $7 to $10..maybe a little more depending where your at..iNCLUDE A zip AND I WILL GET A SHIP QUOTE PRETTY QUICKLY

Ive shipped quite a few so i have a general idea what they ship for...I will combine shipping..and id make a better deal if someone wanted all of them..so..here we go..

ALL ARE USED..ALL VERY USABLE AND COMPLETELY LEGIBLE JUST GOOD USED INFO

#1..QUANTITY 2..66 new product release training manuals..seem to really focus on A/C repair and trouble shooting..has a little 66 chevelle and a little bit more 66 Nova..these where given to the mechanic for traing purposes
$10 each plus shiping


SOLD #2 69 Chassis. sold

.this is a THIN..still lots of info..maybe late and early is a better label..this is a later manual
$25 plus shipping




#3 A/C Delco 71 radio manual..decode radios from 64-71..trouble shoot..wire diagrams including stereolayout..tape players etc..ive made a bunch of money with manuals like this....weed out the good radios from the bad
$30 plus shipping..constantly bring 40 plus on auction site


SOLD #4...69 Chassis manual.SOLD
.this is a THICK..has more sections etc..see the part number change...more than 1/4 thicker than other...maybe early and late would be a better lable..this is an early manual
$35 plus ship

[marxjunk]

#2 and #4 sold

[Enoch]

Nice books!! Overhaul manual is rebuilding instructions of sub components (trans steering box rear) Service manual is more about the operations and adjustments of the overall vehicle.
You don't happen to have a P& A Manual with group 8.900, fasteners??? Always looking for them

[marxjunk]

no i dont for chevys...i do have some GM parts and illustration books for pontiac and olds

[Enoch]

I may be interested what years?

[marxjunk]

they are models thru 75..but they specifically focus on 68 -75 cars for some reason tons of 68 69 70 71 stuff.. not much before then..and of course up to 75....like almost focused 69 and 70 years for some reason

printed in 83..all the illustrations are there..all the specs are there lots of fastener info...let me look thru what i have..ill let ya know what i come up with

[Enoch]

Mark thanks. My understanding is that Group 8.900 was removed from the overall manual starting around 68-69 so that could be the reason. Thanks if it has good fastener info that would be great!!!

[marxjunk]

i went thru them lightly last night and those sections are not in there
then i looked deeper into it and most fasterners had no part number because they where discontinuedor not serviced by this time..the manuals i have are all printed in the 80s

[Enoch]

Mark, Thank you very much for taking the time to look. If you do come across any let me know as I am interested. They usually have a printed date of 69-79. Thanks again, Rich.