Chambered Exhaust for 1969 Camaro

[enio45]

i have an NOS 69Z exh complete -

[Salvatore]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: enio45</div><div class="ubbcode-body">i have an NOS 69Z exh complete - </div></div>

Should we take extra blood pressure pills before you tell us the price?
HAA, LOL!

[Edgemontvillage]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: [email protected]</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: enio45</div><div class="ubbcode-body">i have an NOS 69Z exh complete - </div></div>

Should we take extra blood pressure pills before you tell us the price?
HAA, LOL!
</div></div>

Eddie's is the transverse muffler style exhaust rather than the chambered system I'm looking for. Here is the link to the classifed posting:

https://www.yenko.net/ubbthreads/ubbthrea...stem#Post535942

[camaromb]

The C&amp;C chambered systems did have the CC logo stamped on the hangers so it is easy to verify they are not GM.

[x77-69z28]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: camaromb</div><div class="ubbcode-body">The C&amp;C chambered systems did have the CC logo stamped on the hangers so it is easy to verify they are not GM. </div></div>i have one of the original C&amp;C systems in my car. It will be coming out when I start the restoration. And yes, it does say C&amp;C on the hangers. I guess I was one of the original investors also, as I got the system for half price ($400?).

[Day2_69Z]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: camaromb</div><div class="ubbcode-body">The C&amp;C chambered systems did have the CC logo stamped on the hangers so it is easy to verify they are not GM.</div></div>

yes, stamped small inside hanger.
(SS also)
The pipes are not stamped.
NC8 Tailpipes were natural steel w/ aluminized coating.
Later production standard exhaust and even later ones with resonators.... Z's had Chrome Tip tail pipes, some made by Walker and were actually 2 PC welded beyond first bend around the spring . .approximately 2/3 of the pipe was &quot;flash chromed&quot;. single dip just like air cleaner lids , oil caps, wing nuts etc.