Old style cragar ss vs the new style ss

[whitetop]

I tried to find the name of the co that did the hexevalent but could not find it..though they may have a new name.. From google it appears hexavalent has all but been banned in CA. I have the co's name at home somewhere. Yes you have to cut out the center and after chroming have it welded back together.

I had mine lathed out by a competant shop and then had the steel on the spokes built up by weld and then machined back down for a tight fit but not too tight-slightly snug. make sure you have the chroming co cover the steel tabs or the two pieces will never go back together and they can't make the chrome on the rim to thick. on one wheel I had to grind down the chrome on the backside of the steel rim to make it fit but you would never see this once on the car.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TheNovaMan</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whitetop</div><div class="ubbcode-body">I would suspect Cragar is having their chrome done offshore and the wheels are welded together in the US.</div></div> In 2006, Cragar started casting their aluminum centers and wheels &quot;offshore&quot; but welding the centers into the rims in the USA. However, they are now switching back to all made in USA (if the scuttlebutt I've heard is correct).


I called Stockton Wheel Service (Stockton, CA) in early 2010 about re-chroming a pair of Cragars, and IIRC they were still using the hexavalent chroming process at that time. That was almost 5 years ago, so they may have switched to trivalent by now.

When you re-chrome a Cragar, do you have to cut the center out of the rim shell before chroming? </div></div>

[whitetop]

Here is the co that did these in hexevalant:
Impressions Plating &amp; Polishing
1223 N. Batavia St
Orange CA 92867
714-639-1371

They replated the wheels I had done by Pauls. I think it was $250-275 per wheel but all they did was strip off the chrome but kept Pauls underlying copper and nickel so not much buffing or prep work. I liked their work but by the cap they buffed the nickel down a tad too much and the copper was slightly showing through ..maybe a 1/4 x 1/4 area so no biggie.



Again NOTHING wrong with Pauls..I have had many items done by him.outstanding work but it is not Cragar chrome. Pauls shipped the wheels to me and as soon as I opened the box my heart sank because of the brownish tint.

[Resurrected69ss]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whitetop</div><div class="ubbcode-body">Here is the co that did these in hexevalant:
Impressions Plating &amp; Polishing
1223 N. Batavia St
Orange CA 92867
714-639-1371

They replated the wheels I had done by Pauls. I think it was $250-275 per wheel but all they did was strip off the chrome but kept Pauls underlying copper and nickel so not much buffing or prep work. I liked their work but by the cap they buffed the nickel down a tad too much and the copper was slightly showing through ..maybe a 1/4 x 1/4 area so no biggie.



Again NOTHING wrong with Pauls..I have had many items done by him.outstanding work but it is not Cragar chrome. Pauls shipped the wheels to me and as soon as I opened the box my heart sank because of the brownish tint. </div></div>

Awesome thanks Dave!!