1969 L35 X66 Conv cortez over blk dlx

[firstgenaddict]

After I explained what I thought the cleaning pro offered some suggestions such as the direction of spray, cleaning solution etc. He explained that you need to extract at a higher rate than the volume of solution which is injected. The extraction head is approx 4" wide with a 1/8" opening running the width and the nozzle injects the solution at an angle towards the head. theoretically the solution loops from the nozzle through the fabric then right back through the fabric into the extraction head. Pulling the cleaner and dirt away. There is a clear section on the tube, I really had no idea how nasty a 45k mile interior could become. I don't know a name of the solution or if it was something he had developed after 15 years in the business, he said it was a solution of a non foaming oxy cleaner and a deodorizer which we then mixed with scalding hot water. 4 oz to a gallon.

As a Precaution I wanted to measure the cleaning solution before and after, the loss due to evaporation and wicking was less than 1%. We used a 5 hp carpet cleaning machine with a fabric extraction head.

Here is a gallon of solution from the pass front seat cushion.