Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#1
04-26-2014, 11:42 PM
|
||||
|
||||
Stewart Warner 2 1/8" Oil Pressure Gauge
This is a slightly used Stewart Warner oil pressure gauge. It measures 2 1/8" side to side. Was working when it was removed. Chrome is still very nice around the edge. Pressure measures 0-50 psi. Comes with the bracket on the backside. Both attaching studs and nuts are good. There are a few ink stampings on the side of the gauge (see photo)--not sure how to decode them. *Asking $50 w/shipping included to lower 48 states. PM me with any questions.
Thanks, SAL   
__________________
I currently own a 1969 Camaro SS350. Although the original drivetrain is long gone, this 4/speed car has a March '69 HC coded block with #041 heads. The transmission is an M20 Muncie #660 case and the rearend is a BS coded 12 bolt posi. Built in Van Nuys. 
|
|
#2
05-03-2014, 11:26 PM
|
||||
|
||||
|
Re: Stewart Warner 2 1/8" Oil Pressure Gauge
This oil pressure gauge needs a new home...any offers out there?
__________________
I currently own a 1969 Camaro SS350. Although the original drivetrain is long gone, this 4/speed car has a March '69 HC coded block with #041 heads. The transmission is an M20 Muncie #660 case and the rearend is a BS coded 12 bolt posi. Built in Van Nuys.
|
Linear Mode
