Winching into the trailer

[Vern B]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dusk Blue Z</div><div class="ubbcode-body">I am looking for the way to winch a 69 Camaro into a enclosed trailer, the car has a stock front spoiler. Any special tricks or tools to do the job with out any damage?

Mike </div></div>

I have my winch mounted in the front of my trailer. I tie the car down by hooking to the front of the frame on each side through the two large holes on the very front of the frame. I winch from one of those points also. I don't have spoilers, so I have no issue with winch cable clearance. If you have an issue with the cable clearing the spoiler, rig a tight cable from two tie down points across the trailer from side to side. Run your winch cable under that and it should give more cable clearance by keeping the winch cable close to the floor. I think that should give you enough clearance on the spoiler. If not, you may have to look for a winch point lower and further back on the frame.