![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#1
|
|||
|
|||
![]()
I d go with the stock 302 blue print spec from CRANE. Straight up. Will work great with manifolds. Lot s of people have put in "similar cams" and end up going slower...
Depends what you are wanting in the end.... Performance or sound..
__________________
Pete Simpson 1962-2013 RIP Owen Simpson Eric Simpson |
#2
|
|||
|
|||
![]()
That is the cam I have in mine. Crane spec 302 and it runs good! The LT-1 is still a nice cam though. Would not waste my money on an NOS one though.
|
#3
|
|||
|
|||
![]()
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: [email protected]</div><div class="ubbcode-body">That is the cam I have in mine. Crane spec 302 and it runs good! The LT-1 is still a nice cam though. Would not waste my money on an NOS one though. </div></div>
Agreed. Crane makes that one, and Federal Mogul makes one as well, available from Rock Auto. I am running the LT-1 cam in my 350 (per Eric's advice).
__________________
Don't believe everything you read on the internet ... Ben Franklin |
![]() |
|
|