The New Project: Part Deux!

[njsteve]

I finished the other fiberglass repair work on the missing corners by the windshield and the chipped front corners. I also spent a while grinding and fiberglassing the three cracked defroster ribs. I used a Dremel tool to make a deep groove, 9/10ths of the way through cracked area and then used the fiberglass gel repair to fill the trough I made. It worked out nicely. I even trial fitted the press-on stainless steel edge molding. (That was rather nerve wracking as you have to tap it in place with a rubber mallet to seat it fully).