Cross ram throttle set-up

[Nova Jed]

From what I know....the CrossRam throttle setup was like a 6cyl Nova or Camaro except the cable through the firewall was longer and hooked up to a bracket in the middle of the intake. One of the old Ricks First Gen catalogues had the whole entire setup listed for a 69 CrossRam Z. It wasn't hard linkage. The pedal should just be like a standard 6 cyl Camaro Nova type where the cable comes through the pedal and has a plastic bushing that then snaps into the hole on the pedal bracket. As far as all the linkage is concerned with the carbs on the intake...not sure.