PAINT COLOR

[L30M20]

Lynn, Do Not shoot urethane base or urethane single stage over lacquer unless its sealed with a epoxy thinned as a sealer! You will have adhesion problems. Mix your epoxy normally, then add 10%-25% regular speed(normal) urethane reducer to that mix, let sit (induce) at least 30 minutes, and spray. I always shoot the base color after 30 -60 minutes, you can di-nib if needed with 800-1000 grit or white 3M SCUFF PAD after an hour or so. Epoxy is the best sealer, especially if you have a few cut thrus to metal on edges etc. Basic rule: Epoxy under anything/Epoxy over anything. Next paintjob switch to Southern Polyurethanes (SPI) especially for your primers and clears. C