Tone Blue

[Xplantdad]

You're welcome sir!

[Nova Jed]

I owe you!

[x Baldwin Motion]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Xplantdad</div><div class="ubbcode-body">Here's Jed's engine running... <object width="425" height="350"> <param name="movie" value="https://www.youtube.com/v/-EBIu0VHi2I"></param> <param name="wmode" value="transparent"></param> <embed src="https://www.youtube.com/v/-EBIu0VHi2I" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object> </div></div>



very cool Jed, uncork that mutha [img]<<GRAEMLIN_URL>>/headbang.gif[/img]

[Nova Jed]

Just an update. Been taking the time to get the little details right with the car. Had some time to play with some distributor tuning and think that I have it curved in. Since I can do that now. Thanks to bergy and Plowman. I decided to drop my Rev Pol into the car and use the switch and coil. The front end should be buttoned up shortly. Can't wait until the Nova actually has a grill again.

I know I need to get some pictures up, so please bear with me.

Jed

[jasonL78]

Yes we need more pictures!!!! [img]<<GRAEMLIN_URL>>/headbang.gif[/img]

[Plowman]

I like it Jed,sounds fast.

[Plowman]

Nova Jed clean out your pm box.

[mockingbird812]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nova Jed</div><div class="ubbcode-body">Just an update. Been taking the time to get the little details right with the car. Had some time to play with some distributor tuning and think that I have it curved in. Since I can do that now. Thanks to bergy and Plowman. I decided to drop my Rev Pol into the car and use the switch and coil. The front end should be buttoned up shortly. Can't wait until the Nova actually has a grill again.

I know I need to get some pictures up, so please bear with me.

Jed </div></div>

Hey Jed,
Spill the beans. Do you have the wiring and function of the rev pol coil, dizzy, and switch figured out? Lets see some fotos! Thanks

[Nova Jed]

Sam, I think I have figured out what it does? The switch is there to give the coil a full 12 volts. The way that its wired into the ignition circuit would indicate that with the switch in the street position, voltage steps down through the resistor and in the strip position, it bypasses the resistor and goes straight to the coil. Hence the warnings of only having it in the strip position while at the races.

I have realized mounting the coil to the firewall isn't as easy due to the automatic dipstick. That dipstick took my sweet spot!!! I wasn't thinking with my dipstick!

[mockingbird812]

Good stuff Jed, that makes sense. Post some pix once you install that bad-boy system! [img]<<GRAEMLIN_URL>>/headbang.gif[/img]