Day 2 Lakewood Traction Bars

[Salvatore]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DarrenX33</div><div class="ubbcode-body">What is the date cut off between the square tube and rectangle tube? </div></div>I believe 1971-72ish. from square to rectangular. That is what my catalogs show. Also never remember the bars having the logo's on both sides. All the original bars I had or redone had the decals/stickers only on one side. Dave Miller will probably know for sure.

[SuperNovaSS]

Thanks Joe,

I wonder why the application for Nova only shows to 69 if they were made later.


Jason

[whitetop]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: [email protected]</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DarrenX33</div><div class="ubbcode-body">What is the date cut off between the square tube and rectangle tube? </div></div>I believe 1971-72ish. from square to rectangular. That is what my catalogs show. Also never remember the bars having the logo's on both sides. All the original bars I had or redone had the decals/stickers only on one side. Dave Miller will probably know for sure. </div></div>
Sam, I'm thinking they came out in very late 1970 in a press photo. I have somewhere a 1971 ad showing them, can't remember the month off hand and I have never seen the decals on both sides either on NOS or used ones I have seen on real life. Not to say it was never done.

[markjohnson]

Concerning the sticker facing out, it looks like the sticker is on the shock side of the traction bar, but if you would happen to re-locate your shocks inboard (which is very popular to do on '67-69 Camaros) you need to swap the Traction Bars from side to side which puts the stickers to the inside then.