What size Torque Thursts and tires on '68 Camaro??

[OldZ28Owner]

Back in the day, I had a 68 Z28 and put TT's on it that were 15 by 7 with F70's and they rubbed on the front. Dropped back to E70's and they still hit the bright aluminum trim around the front opening. I notched it at the top and no further problem. Back was not a problem with the F70's.

[92646]

The T70R is a American 5-spoke that was made for a short period of time then reproduced recently. It has a little bit of a flange on the edge of the spokes and it has more offset to the inside than the TTO 5-spokes.

[Big Squeeze]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 92646</div><div class="ubbcode-body">The T70R is a American 5-spoke that was made for a short period of time then reproduced recently. It has a little bit of a flange on the edge of the spokes and it has more offset to the inside than the TTO 5-spokes. </div></div>

OK........I'll look into a set of those.....It appears that offsetting the wheel in some will help tire clearance at the back edge of the wheelwell......

[Plowman]

You could try 15x6 on it,that is what worked back in the day. *Paul

[Big Squeeze]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Plowman</div><div class="ubbcode-body">You could try 15x6 on it,that is what worked back in the day. *Paul </div></div>

From the looking I've done, it appears that Torque Thrusts only come in 4.5&quot; or 7&quot; in light grey or 5&quot; or 7&quot; in dark grey......and the T70R is only available in 7&quot;...........