Next Years Power Tour Car

[napa68]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body"> I needed to raise the Engine about 5/8&quot; to get the Pan off the Crossmember.....Rather than mess around with Frame mounts and Motor mounts, I decided to make new motor mount adaptor plates......because the mounts are on an angle and I wanted to raise the engine, I had to figure out how much to move the rubber mount holes and how much thicker to make the plate to get everything to fall into place.....here are some pic's

Store bought plate in black......you can see how the 3 rubber mount holes are moved down and the plate is also thicker



New plate mounted to the engine......



These here.....................are the BOMB!

Thanks for the help Ken!







</div></div>