![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#13
|
||||
|
||||
![]()
Mike,
Also, 1. Check the driver side rear wheel well for the dual exhaust plate: ![]() 2. Check the floor boards above the rear axle for special brackets that are welded into the floor/frame rail for the F41 option. (no pic for this one...) 3. Single fuel line is a good sign, should have a rubber hose at the tank end, in between the two lines (under the passenger door area), and one at the fuel pump - like this: ![]() 4. Check the core support for this weld nut: ![]() 4a. And make sure that the core support has the large opening for the radiator - but now large holes next to the opening on the driver's side (that would be an a/c support, and will/can have the holes on top for the special hood to core seal). ![]() 5. Check the speedo cable exit hole on the f/wall, 4speed cars should come out just around the distributor location: ![]() 6. Check for this rectangular hole in the trans xmember with a diagonal corner: ![]()
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
|
|