72 TA : New Project

[njsteve]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: x Baldwin Motion</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: njsteve</div><div class="ubbcode-body">And one of the major modifications, which was to add almost a 1/2 inch of reinforcement material (urethane bumper repair material) to the outer edges.



.......</div></div>


Steve, can you point out exactly where you added material here please. Did we already see before and during photos for this piece? </div></div>

Here is my original shattered valance. As you can see the upper left side edge is razor thin. That is where we added all the extra material. Yes, we covered this a few years ago in the thread. [img]<<GRAEMLIN_URL>>/grin.gif[/img]



Here is the link to the fix on the white valance from back in 2008:

https://www.yenko.net/ubbthreads/ubbt...05&amp;page=63

And the blue polyethylene valance back in 2006:

https://www.yenko.net/ubbthreads/ubbt...05&amp;page=23