67 Chevelle pitman arm

[VintageMusclecar]

Jan;

The pitman arm isn't normally replaced on these cars, there are no wearing components on it.

Is your friends car a manual or power steering car? I have a new manual arm available if you can use it.

Eric

[jannes_z-28]

It was just that I told him to buy all the parts for the steering linkage, he told med that they didn't have the pitman arm for his car.

We got everything else so we just skip that part then.

Tomorrow I will get greasy [img]<<GRAEMLIN_URL>>/grin.gif[/img]

Thanks


Jan

[jannes_z-28]

Well we have got some problems with the steering linkage. The centerlink needs to be replaced, as mentioned before I thought we could change the pitman arm since the link is loose. The part that needs replacement is the centerlink were the loose link is located.

It seems difficult to find this part, Moog doesn't carry it.

Does anyone know were we could find a Centerlink for this '67 Chevelle?

Thanks


Jan

[John Brown]

http://rareparts.com/

Jan,

Rare Parts in California shows that they have them. Their web site catalogue is a little hard to get through, but I found that their part number is 25795. You might want to contact them and verify that though.

[jannes_z-28]

Thanks for the tip!

Surfing around a while I found this on Summit:
http://www.summitracing.com/parts/CLP-DS740/
From Classic Industries

Jan

[John Brown]

Summit is <span style="text-decoration: line-through">cheaper</span> less expensive than Rare Parts is. Good thing you kept on looking. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

[wheelhop]

I purchased a centerlink recently for a 69 chevelle from NPD. I'm sure they would have it for a 67 also.