Lakewood roll bar

[John Brown]

I sent Brent the pictures, but I'll send then along to you too.

[brent396]

Thanks for the pics john.I have one i dont see it for a 67 gtx but i can modify the feet to work.Is that a hugger orange color?

[RichSchmidt]

A few months back a friend of mine called me and asked me if I wanted to buy one for a 1st gen camaro brand new in the box.I wonder if he still has it.I have to call him today I will ask.

[PxTx]

I have to ask,but there probably is an obvious answer. What is up with the bent cross-bar? Seems like to would be simple and stroger to go straight with it.

[John Brown]

Don't know about the color on the Nickey bar but as I recall the originals were red.

[396L35]

[ QUOTE ]
Don't know about the color on the Nickey bar but as I recall the originals were red.

[/ QUOTE ]
Not all Lakewood bars were red, mine has a factory black foam coating around all the bars. Mark

[Musclecarkid]

I have a Chrome Lakewood 3 point bar with an optional swing out door bar. Never seen another like it.

[waynemiller]

The pic in this thread is my car, we had to cut down the main hoop by about 2 inches amd realign the rear bar. We also made a mount out of flat bar, so we would not have to cut the rear seat. I will post a couple of pics. I also just sold a 3 point yesterday on craigslist.

[Musclecarkid]

I believe the rear support bar goes between the upper and lower rear seat cushions and bolts to existing seat belt bolt hole. Additional holes may be required, but not necessary for show purposes. Camaro and Chevelle bars fit with no modification to the rear seat. Note rear support bars are different just as the front mounting feet are different. Some rear bars have slight bends to make the roll bar sit correct in the car,