Look what we got :)!!! - Page 2

**Xplantdad** · #11 03-25-2010, 05:14 AM

It was $500...I don't know if that's a good deal or not...

**Xplantdad** · #12 03-25-2010, 05:17 AM

[ QUOTE ]
Bruce, that's a great foundation for a VERY strong street engine. Those '73-'74 454's have excellent potential with their #781 or #049 oval-port cylinder heads and are one of my favorite foundations for a great engine. Have a reputable shop put the larger 2.19/1.88 valves in the heads, punch the cylinders out .060 for a big 468 CID, keep the cast crank and 3/8 rods with ARP bolts, slide in a Comp Cams 288 Street Roller with a Performer RPM dual plane intake and 850 Holley and this thing will run 11.40's all day long in a decently prepared car. This a great combination that has been copied MANY times over because of it's brutal effectiveness. John Lingenfelter and I came up with this great combination while out on my pontoon boat a long time ago and it just flat out works. He was absolute genius in the pursuit of power.

[/ QUOTE ]

Mark, cool info. I appreciate you sharing

The engine is going into my 16 year old nephew's Chevelle. I think we're going to keep it on the mild side for now...maybe just add a slightly better than stock cam

Pump gas...not too crazy, ya know?

**markinnaples** · #13 03-25-2010, 05:17 AM

What's the Chevelle like that it's going into?

Sounds like a score to me.

**Xplantdad** · #14 03-25-2010, 05:19 AM

[ QUOTE ]
Cool! We'll be wantin' a weekly photo update now.

[/ QUOTE ]

I don't know that we'll be starting right away...but I will update when we do

4onthefloor · #15 03-25-2010, 05:34 AM

I scored this "Factory replacement" motor that was changed by the Chevy Dealer ..Back in the days.. it was in a 1973 Montecarlo & the motor had REALLY low miles , The original owner put a Hei on it.. everything else was NEW..even the Qjet... All i did was put a Nice Dual plane intake -Small primary Hedman hedders-Factory point ignition& a holley 800 And its all hooked up to a 4 speed with 4:10 gears, This thing is a TORQUE monster ,Lots of fun for what it is& im still running the factory Cam in it..Also its got the 781 heads & "high" nickel block... So you GOT a Nice engine For a Decent price

**Xplantdad** · #16 03-25-2010, 05:49 AM

[ QUOTE ]
What's the Chevelle like that it's going into?

Sounds like a score to me.

[/ QUOTE ]

It's going into the Chevelle on the left...

**Bill Pritchard** · #17 03-25-2010, 07:20 AM

[ QUOTE ]
We went to Apache Junction last night....

[/ QUOTE ]

Hey, you were *almost* out to my neck o' the woods

Tis a long haul from your house, no?

4onthefloor · #18 03-25-2010, 07:36 AM

My '73 454 all dressed up- I did put a Gm performance aluminum hi flow water pump on it... That chevelle is Gonna be REALLY cool with that Big Block in it.. Nice car

**Xplantdad** · #19 03-25-2010, 08:07 AM

[ QUOTE ]
[ QUOTE ]
We went to Apache Junction last night....

[/ QUOTE ]

Hey, you were *almost* out to my neck o' the woods

Tis a long haul from your house, no?

[/ QUOTE ]

Cripes yes...I think we were almost in New Mexico!

Actually, we were off of Brown Rd. and not too far from San Tan Flats!

We need to get together

**Xplantdad** · #20 03-25-2010, 08:16 AM

[ QUOTE ]
My '73 454 all dressed up- I did put a Gm performance aluminum hi flow water pump on it... That chevelle is Gonna be REALLY cool with that Big Block in it.. Nice car

[/ QUOTE ]

Thanks Hector!

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.