Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
|
|
#3
04-12-2010, 07:03 PM
|
||||
|
||||
Re: Dedicated Day 2 Thread
Looks like 15x8 wioth L60's out back, but it's the way the fronts round out the look to make it perfect!
I also would like to know what you're running up front.
__________________
Paul III 
|
|
#4
04-12-2010, 07:08 PM
|
|||
|
|||
|
Re: Dedicated Day 2 Thread
NO vacuum advance needed for this distributor. All curve in by around 2,800 rpm's. Wheels are 15X6 and 15X7's. Vintage L60's in the rear. The Koni shocks are a better choice for drag racing with the adjustment but pale badly in comparison to the Dennis Cumby "Mr. Gasket" shocks I installed. Making those Thrush mufflers into header mufflers and they will probably go on the car also. The car also has an old Hurst CP shifter with a vintage white T-handle. Check out the license plate frame I acquired by twisting GTO DON's arm. Some vintage decals for the 1/4 windows to follow. Have to thank M22Mike again for his posting skills cause mine are non-existent
|
|
#7
04-12-2010, 09:12 PM
|
|||
|
|||
|
Re: Dedicated Day 2 Thread
Mike you are a good guy. Did not have to do that BUT We will take it!
 I love you Chicago guys, even the "numbers guy" that lives in Wisconsin.
|
|
|
|
Hybrid Mode
