Buford the Buick

Hey Guys ...thanks for the responses. My Buick has been a mix of ideas that I've had for years (OK - decades <g&gt. It's not a legal drag car -- no cage or roll bar. Instead, it was supposed to be a modern version (and my own interpretation with a GM bias) of Addison's Silver Bullet. That car influenced me greatly over the years. So basically, like Addison's Mopar, the Buick was put together with the best hardware I found that was somewhat streetable. It really is a cool car, and I suspect it will really rock and roll with just a simple 572 crate motor.

My old black 69 Camaro haunts me regularly. It's one of those cars I wish I never would have parted with (the other is a for real 1971 LS6 Corvette that I regrettably sold in 1974). The truth was, I had a big tax bill that had to be paid. I had a new EFI Firebird drag car in the shop (NHRA B/Stick Stocker that Tim Bishop now campaigns). The 'Bird was giving me the opportunity to make an income while the '69 was sitting still. So I pulled out the L88/Turbo 400 combination and sold the Camaro to a fellow back east. The L88 was sold to a guy in Oregon who passed away before he could use it. Kip Martin did the machining on the L88. It was a (really) nice piece -- it was more or less an NHRA stocker style engine. FYI, drag racer, Ken Reich was the original owner of the Camaro.

If you folks ever want to see more pix of the Buick, let me know. The suspension is really neat and so is the rear end assembly. My old racing partner, Mike Pustelny narrowed the housing, fought with the concept of fitting the stock mounts in place (with the narrowed width and the huge by large M-W housing ends) and back braced it. Mike does really, really nice work. You should have seen the raw TIG welds.

But I digress. Like I said before....you guys rock and thank you for letting me ramble about some of my old heaps.

Wayne Scraba