![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Not likely but take a look here
__________________
Don't mistake education for intelligence. I worked with educated people. I socialize with intelligent people. |
#2
|
|||
|
|||
![]()
Already did, thank you. The wierd thing about this one is the guy who owns it says it was bought by a dealer, sent down to be converted & sold at another dealer other than Yenko Chevy. Does this sound right? It also doesn't have the original engine, however, it is an LT-1. What's it worth without the docs, & restored?
|
#3
|
|||
|
|||
![]()
What channels do you have to go through to verify the cars authenticity if you do not have anything other than the window sticker & VIN????
|
#4
|
|||
|
|||
![]()
Look at the Vin# if the third number is not a even # it's a 6 Cyl. car.
__________________
Jake is my grandson!! |
#5
|
||||
|
||||
![]()
[ QUOTE ]
What channels do you have to go through to verify the cars authenticity if you do not have anything other than the window sticker & VIN???? [/ QUOTE ] What are you trying to verify that it is? ![]() |
#6
|
|||
|
|||
![]()
"Look at the Vin# if the third number is not a even # it's a 6 Cyl. car."
It is a 3. I stated it was a 6 cylinder 2 speed car. The owner stated that it was a car from a dealer that was sent out for a conversion & sold from that dealer, not Don's. Kinda like the new Hennessey Camaro SS. Does anyone know if this was done back then? Also is there a "Yenko Archive" where you can track the cars or VIN'S that were done by him or his dealership? "What are you trying to verify that it is?" A Yenko Nova. That is what I'm trying to verify. It looks really close to what it should. The door panel trim that says Yenko looks as old as the car. Subframe connectors look correct, ladder bars, TH 400 with floor shift & rally gage pack, etc... If this is a clone, it's a very believeable clone. I need to know if anyone has the archives to the dynasty, & how to gather more info on this car. Can GM still track a VIN from that era???? |
#7
|
|||
|
|||
![]()
Called a buddy & found out there is a number to call for these types of things. Now, There were dealers as I understand that sold Yenko products throuought New England, possibly the entire east coast. This leads me to believe this story could indeed have some validity, but also means that this car wouldn't be as valuable as the one's sold from Yenko Chevrolet. I will continue my research & see what I can come up with.
Lastly, What are these cars worth these days? I mean, a clean restored Nova, not necessarily a Yenko Tuned Nova. Just want to know how deep I should swim on this. |
#8
|
|||
|
|||
![]()
[ QUOTE ]
Called a buddy & found out there is a number to call for these types of things. Now, There were dealers as I understand that sold Yenko products throuought New England, possibly the entire east coast. This leads me to believe this story could indeed have some validity Yenko had a dealer network in many states, not just the East coast. There has been some speculation that possibly some 67 6 cyl camaros were converted, but I think it was speculation only. Most conversions at least started with a 12 bolt turbo 400/Muncie 4spd, and V8. I'd again ask what the window sticker with the Yenko conversion shows, by posting a picture. Without documents that verify it was converted, and a owner history, and verification, you have a 6 cyl Nova worth maybe 2500.00-10K depending on what's there, and condition of the sheet metal. FWIW |
#9
|
||||
|
||||
![]()
Yenko Nova's are not my area, but I've been educated here and believe all the 1970 Yenko Deuce's were factory LT1 COPO cars.
![]() I will never say never about any dealer putting anything under the hood though. ![]() |
#10
|
|||
|
|||
![]()
I thank you for your honesty & efforts XBM. I really have to believe that this guy was crafty enough to market himself & his product in a way that sent a wave of demand his way back then & may have used all means to meet supply, however, I also believe that there are some pretty crafty restorer's out there that could actually fabricate this situation, right down to the window sticker.
I guess I'll take my chances on this one. I don't think I'll do badly. |
![]() |
|
|