Factory appearing Tall Valve Covers?

[Chevy454]

Year One offers tall "stock appearing" covers...but iirc, the Crane or Comp gold series rockers will go under the stock covers with double gaskets & no baffles...we've run the spacers before, and they're ok if you paint them, but on our next engine we're gonna use the stock appearing covers.

[BJCHEV396]

Noah Performance at 1-800-913-3511.Bill.

[92646]

Here is a picture of the right side of a 540 with roller rockers that I installed these on. They worked great.
Mark Sheppard

[larry_csa]

Mark: Which valve covers do you have Noah or Year One?? Think/will it clear a stud gertel(sic) 720 lift cam.
Larry

[Zach Carter]

Larry,

Year One buys the valve covers from Noah. Best thing to do is wait till Year One sends you one of their 15% off cards and order up a couple of sets. They are always on backorder from Year One. My L72 has these valve covers with a .615 lift and full roller rockers and I had zero problems.

[92646]

Larry I bought these from Noah thru e-bay several years ago. I remember the price being very reasonable and the quality was very good. The covers are canted and I think there would be room for a stud girdle.
Mark Sheppard

[bilede]

I had a set of the aluminum 1 inch spacers machined off to 1/2 inch and at first glance you almost can't tell they are there. that was all I needed to clear rollers.