![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
#1
|
|||
|
|||
![]()
This Corvette on e-bay appears to have a Motion hood on it but no other Motion parts.
http://cgi.ebay.com/ebaymotors/aw-cg...384801&r=0&t=0 |
#2
|
|||
|
|||
![]()
I don't know but the ad seems strange. He says he's been driving the car and its a one owner. But he says the car was originally yellow and SOMEONE in the past had it repainted. Is he the original owner? If not then its a two owner if I'm not mistaken, no big deal but it had me confused for a second. About the hood, I never seen one like that. I assume the Motion hoods were much more pronounced, as in larger scoop, more noticeable.
|
#3
|
|||
|
|||
![]()
The pics are pretty crappy but the hood does look VERY similar to one of the Phase III 'Vette hoods I've Seen:http://www.corvettes-musclecars.com/...dwin/index.htm
__________________
-=Mark Holman=- |
#4
|
|||
|
|||
![]()
IMHO I think the 67 stinger is mounted too far back. It should be a L-88 style hood with
a 67 stinger on top with I think an air gap at the front of the stinger. Randy Leffingwell book on the Otis Chandler collection shows it well. |
#5
|
|||
|
|||
![]()
I think the Motion hood was a 67 type hood scoop with no stinger mounted on the stock type big block hood scoop. Look at this picture of Kevin's Motion Corvette.
http://www.corvettes-musclecars.com/...dwin/index.htm |
#6
|
|||
|
|||
![]()
Looks like a phase III hood. The 67 vette scoop was molded into a standard 427 hood not an L88 hood, and the top of the hood bulge gets smoothed with no stinger. Doesn't sound like a motion vette though. He describes it as a 390HP car. It has a rochester carb (phase II cars came with a holley) and I think he means he is the "only owner" he doesn't sound like the original owner. That statement is a little deceiving. But who knows. He also said it was missing carb linkage. Maybe it had a holley on it and somebody changed it back to a qjet not knowing what the car was. Original restored 427/390 are worth around $20,000 so it would be a decent deal for around $10,000 and you might be pleasantly suprised if it is a BM car. The hood alone is worth something if its a real BM hood and it definately looks like one.
|
#7
|
|||
|
|||
![]()
HAH Seller also has a negative feedback rating!! Never saw that before. Boy that sucks!
Ed |
![]() |
Thread Tools | |
Display Modes | |
|
|