Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
|
Thread Tools | Display Modes |
|
#1
05-05-2013, 06:31 PM
|
||||
|
||||
1960s International Dragmaster 15x6 Set of 4 $450
Bought these thinking they were 4.75" bolt pattern, turns out they are 5" (early full size GM) so I can't use them....
Nice original set of high-quality Torq Thrust copies from late 1960s. Have been stored since the 1970s and need to be freshened up. Minimal dings / scratches - see pics of the worst ones. Paint is flaking off the spokes. Bullet style center caps included. Will need to have a few of the original broken cap screws removed. Very tough to find in 5" BP - hopefully one of you guys/gals can use these. Pics below:        
|
|
#2
05-05-2013, 07:38 PM
|
||||
|
||||
|
Re: 1960s International Dragmaster 15x6 Set of 4 $450
Put them on the HAMB. A lot of guys looking for 5x5" pattern over there.
-Matt
__________________
Day 2 is Life.
|
|
#5
05-30-2013, 02:31 PM
|
|||
|
|||
|
Re: 1960s International Dragmaster 15x6 Set of 4 $450
Just a heads up...SUPER easy to punch a new BC on those.. Any gypsy Joe machine shop can do it..My guy charges me $100-125 a set...Work perfect when done. I've done Cragars, Hursts', and just last month a set of 200s'...
|
Linear Mode
