1960s International Dragmaster 15x6 Set of 4 $450
 

Bought these thinking they were 4.75" bolt pattern, turns out they are 5" (early full size GM) so I can't use them....

Nice original set of high-quality Torq Thrust copies from late 1960s. Have been stored since the 1970s and need to be freshened up. Minimal dings / scratches - see pics of the worst ones. Paint is flaking off the spokes. Bullet style center caps included. Will need to have a few of the original broken cap screws removed.

Very tough to find in 5" BP - hopefully one of you guys/gals can use these.

Pics below:

http://tonyn.smugmug.com/Other/Parts...2/image-X2.jpg

http://tonyn.smugmug.com/Other/Parts...2/image-X2.jpg

http://tonyn.smugmug.com/Other/Parts...2/image-X2.jpg

http://tonyn.smugmug.com/Other/Parts...2/image-X2.jpg

http://tonyn.smugmug.com/Other/Parts...2/image-X2.jpg

http://tonyn.smugmug.com/Other/Parts...2/image-X2.jpg

http://tonyn.smugmug.com/Other/Parts...2/image-X2.jpg

http://tonyn.smugmug.com/Other/Parts...L/image-XL.jpg

Re: 1960s International Dragmaster 15x6 Set of 4 $450
 

Put them on the HAMB. A lot of guys looking for 5x5" pattern over there.

-Matt

Re: 1960s International Dragmaster 15x6 Set of 4 $450
 

Thanks, I did!

Tony

Re: 1960s International Dragmaster 15x6 Set of 4 $450
 

Will deal on these a little if someone needs them.

Re: 1960s International Dragmaster 15x6 Set of 4 $450
 

Just a heads up...SUPER easy to punch a new BC on those.. Any gypsy Joe machine shop can do it..My guy charges me $100-125 a set...Work perfect when done. I've done Cragars, Hursts', and just last month a set of 200s'...