under hood closure panels

[Postsedan]

Ditto!

Dan.

[jeff morocco]

closure panel


cowl vent grill


shift pattern plates for 5 or 6 speed Tremec or Richmond


we do make radiator covers too but i dont have any pictures yet.
available in Clear, Gloss Black,Satin Black and Polished
is extra $$.
closure panel......$100.00
cowl vent grill....$49.50
radiator cover.....$49.50
shift pattern plates..$35.00
engraving is $20 for any panel.






i had Morocco Family Racing put on mine that you can see in my signature.

[jeff morocco]

67-69 camaro panels
1 piece



2 piece panel



1 or 2 piece panels.........$75.00
polished....................$82.00
engraved...................$98.00

69 cowl hood grill

design #2


cowl hood grill..design 1&2......$25.00
polished.........................$27.00

lower closeouts...clear anodized only

This panel was originally plastic and installed on the big block a/c cars. GM knew that air was being re-introduced to the front of the radiator when these cars idled. At speed the pressure from air coming under the core support was working against the flow of air through the radiator, so this panel was designed.
The GM panel only goes as far as the core support. We wanted to force ALL of the air from the grille through the radiator, so ours goes all the way up to the backside of the spoiler (or to the valance). It has a divider at the core support to finish off the seal.
67-68

69


lower closeouts........$150.00

here is a drawing of the GM plastic panel.......

[Postsedan]

Jeff,

Very nice. Is the 1969 Chevelle radiator cover the same as the picture of the camaro, or is it something all together different? What are the parts made of, can they be purchased natural so I could have them powder coated to my liking? Is there another price if left natural?

Dan.

[jeff morocco]

Dan,

im not going to say no about getting them natural, however, they come in 4x8 sheets already coated in the 4 finishes available. let me check on that one.
they are made out of 14 gauge aluminum.
here is a picture of a radiator cover......

[jeff morocco]

70-81 camaro panels

There are 2 sizes of radiators so you will need to know if you have a "Standard" or "Heavy duty". The standard radiator hold-down panel measures almost 24" and the heavy duty measures just over 28".
The 70-73 Rally Sport had 2 extra support brackets above the hood latch.must specify if RS model.





black/clear anodized.............$75.00
black/clear engraved.............$98.00

free shipping to paid members

[jeff morocco]

64 chevelle







black/clear anodized.......$75.00
black/clear engraved.......$98.00

custom engraving is available on ALL panels and car types.