2nd gen (70-81) Z28 wheels

[Hylton]

[ QUOTE ]
Good info there, Chuck...thanks! But basically, if I score *any* set of 2ng gen Z wheels I won't run into any wierd offsets or ring/cap problems, right?


[/ QUOTE ]

Any set will work Rob but the round holed rims are usually much cheaper. The rings and caps are interchangeable BUT due to the design of the early rims (slotted and oblong valve stem holes) the trim ring will only show it's face. In the later rims (round stem hole) the inner rim was set back a bit so that a quarter inch of the inner part of the trim ring will show. This actually looks nicer but it is not correct for 70-72 cars.

Whatever rims you use, you will not have any backspacing problems.