2nd gen (70-81) Z28 wheels
 

I need a set of (4) 2nd gen Camaro Z28 wheels...preferably original, or painted like original, but mainly just need 'em straight, 'cause the car is gonna be DRIVEN... https://www.yenko.net/ubbthreads/imag...ns/naughty.gif

Re: 2nd gen (70-81) Z28 wheels
 

call this guy, BOB with east coast performance 252-619-6684 he's putting new sheet metal on my 69 conv. camaro. saw him friday, and he said he had a set.

Re: 2nd gen (70-81) Z28 wheels
 

Rob, Sent you a PM.

Re: 2nd gen (70-81) Z28 wheels
 

I also sent you a PM.

Re: 2nd gen (70-81) Z28 wheels
 

Anyone know if the round or oval valve stem hole are the only differences between early & late wheels? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 2nd gen (70-81) Z28 wheels
 

Only difference... but also the casting... AU for 1970-1973... (I think)

Re: 2nd gen (70-81) Z28 wheels
 

[ QUOTE ]
Anyone know if the round or oval valve stem hole are the only differences between early & late wheels? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

[/ QUOTE ]

Rob seems like there was something else, I did a search over at Nasty on the set I had, and a guy had lots of info and pics on what to look for in a post, it was a real good read...be darned I cant recall much of it though, lol claiming a senior moment, over and out.

Re: 2nd gen (70-81) Z28 wheels
 

The below link tells the story on 70-81 Wheels. I wont go on and on about all the misc details concerning rings,caps &lug nuts, cause I dont think that was your intent. The small oblong 5/8"X1" Valve Stem hole stopped around May-June and the late 70-73 Z-28 got the 13/16"X 1" hole wheels


http://www.nastyz28.com/faq/wheel/z28wheel.html

Re: 2nd gen (70-81) Z28 wheels
 

Good info there, Chuck...thanks! But basically, if I score *any* set of 2ng gen Z wheels I won't run into any wierd offsets or ring/cap problems, right?

Thanks to a couple of members here I think I've got some lined up, and just wanna make for sure before the checks go in the mail...https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 2nd gen (70-81) Z28 wheels
 

Rob, In so far as I know, ALL the 70-81 Z-28 wheels will have same basic external/internal specs. Like above link points out, the trim ring just sits differently with 77-81 wheels. You HAVE to use the Laquer paint formula with suede additive to achieve the 70-74 look, but advising you its not a durable coating and advisable mostly for show cars.
ROUND hole 77-81 Z wheels were painted body color as you probably already know......