1969 Camaro SS 396/L78 (396/375HP) pics and info

[Charley Lillard]

Part of the problem is the pic of the engine pad stamping is not clear enough to see the broach marks. You need a camera with a macro setting.

[joey]

camera is ok its operator error we are working feveroushly (reading the manual )to resolve the problem

[TimG]

I've had POP's with incorrect information on them. One original owner car had a POP with a completely different rear end code and date on it and the rear in the car matched the tank sheet and was correct. It was the original POP. I wouldn't discount everything because of this error only. The picture of the stamp isn't clear enough to tell anything.

[lowmile]

Joey, here is a pic of a 70 Nova 375hp/396 block you can se the broach marks pretty well. Were these engines stamped before or after the installation of the heads? m

[joey]

here are the engine stamping of vin notice the numbers in the circle I am sure there is no way these could be changed they match the vin and pop thanks and sory it took me so long to figure or at least half way figure this camera out thanks to all who have helped the car goes on ebay sunday if not sold before

[Charley Lillard]

You found the macro setting. Now if we can get a pic that clear of the stamping at the front of the block....

[WILMASBOYL78]

[ QUOTE ]
Joey, here is a pic of a 70 Nova 375hp/396 block you can se the broach marks pretty well. Were these engines stamped before or after the installation of the heads? m

[/ QUOTE ]

Mark, that date is the same as my 70 black 4psd car....11/25/69 CKO I guess the Buffalo boys were busy that day..

wilma

[joey]

top stamping I used a scuff pad to remove paint so you can see good

[southernfriedcj]

Joey, did you just sell a Green '69 Chevelle SS?

Jim

[joey]

[ QUOTE ]
Joey, did you just sell a Green '69 Chevelle SS?

Jim

[/ QUOTE ]
no I only have two camaros and two dodge coronets