BB Nova z bar 1970

TDW · #1 10-28-2005, 01:52 PM

Does anyone know if there is a part number stamped in the z bar? If there is, anyone know what the number is? Does anyone have one they could measure for length for me? Many thanks...Tony

**Hotrodpaul** · #2 10-28-2005, 03:12 PM

I know my BB Camaro Z bar is roughly 9.5" long. I believe the small blocks were around 9" long since the BB was offset to the passenger side for exhaust manifold clearance.

Paul

**mnyenko** · #3 10-28-2005, 04:29 PM

The part number was not stamped on the bar. It is no longer available from GM. They sold the rights and it is repoped. If you change from a small block to big block Zbar. You will need to change the other parts going to the fork. Chevy 2 only and others sell a change over kit. Earl

TDW · #4 10-28-2005, 04:52 PM

Thank you guys for the answers.
Earl..Do you know if the repops are a decent quality part?

**WILMASBOYL78** · #5 10-28-2005, 05:08 PM

Check with the folks at National Nostalgic Nova. They may have an original used setup or they can provide a quality reproduction one. Call them at 717-252-4192.

wilma

Supercar_Kid · #6 10-28-2005, 05:32 PM

Hey Tony...I think I smell what you're cookin'.

TDW · #7 10-28-2005, 05:53 PM

OK Tom..Thanks

Erik..I tore the 427 down. Looks pretty good. Am heading to the Machine Shop shortly.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.