BB Nova z bar 1970
 

Does anyone know if there is a part number stamped in the z bar? If there is, anyone know what the number is? Does anyone have one they could measure for length for me? Many thanks...Tony

Re: BB Nova z bar 1970
 

I know my BB Camaro Z bar is roughly 9.5" long. I believe the small blocks were around 9" long since the BB was offset to the passenger side for exhaust manifold clearance.

Paul

Re: BB Nova z bar 1970
 

The part number was not stamped on the bar. It is no longer available from GM. They sold the rights and it is repoped. If you change from a small block to big block Zbar. You will need to change the other parts going to the fork. Chevy 2 only and others sell a change over kit. Earl

Re: BB Nova z bar 1970
 

Thank you guys for the answers.
Earl..Do you know if the repops are a decent quality part?

Re: BB Nova z bar 1970
 

Check with the folks at National Nostalgic Nova. They may have an original used setup or they can provide a quality reproduction one. Call them at 717-252-4192.

wilma

Re: BB Nova z bar 1970
 

Hey Tony...I think I smell what you're cookin'. https://www.yenko.net/ubbthreads/imag...ns/naughty.gif https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: BB Nova z bar 1970
 

OK Tom..Thanks

Erik..I tore the 427 down. Looks pretty good. Am heading to the Machine Shop shortly.

Re: BB Nova z bar 1970
 

Tony,
I have the repop Zbar in my 69 SS Nova. The fit and look is good. The kit is a good way to get all the parts you will need for SBC to BBC conversion. If you run a 4spd. You will need to change the crossmember as well. Still waiting for mine. https://www.yenko.net/ubbthreads/imag...emlins/mad.gif Earl

Re: BB Nova z bar 1970
 

Thanks Earl.