Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#1
01-08-2012, 05:11 AM
|
||||
|
||||
Intake Gasket
I am making some changes to my motor (intake/carb). When I removed them the other day, the intake gasket (Fel-Pro 1211)was cut/torn in a few spots.
I believe this was due to the ports on the heads being bigger than the intake so when they compressed together, the gaskets were cut. Any recommendations on a gasket that will work with my set up, which is ported heads and a non-ported intake? I really don't want to gasket match the intake if I don't have to. Thanks, Kurt
__________________
 1969 SS396 Post Sedan Delivered to Van-T Topeka KS MCACN Day2 Concourse Gold Award 1965 VW El Lobo Dune Buggy built in the mid 70’s for the Iowa Shriners 1968 Schwinn Orange Krate 1969 Schwinn Pea Picker 1968 Schwinn 5-Speed 1970 Schwinn 3-Speed Deluxe 1972 Schwinn 10-Speed Continental 1973 Schwinn 5-Speed Suburban All Original Paint Bikes 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode