Needed - Speedo Adapter P/N 6476736
 

I am looking for an AC Speedo Adapter P/N 6476736 for my 69 Camaro w/4.10 gears, Muncie and F70-14 tires. Any out there? Thanks,

Paul

Re: Needed - Speedo Adapter P/N 6476736
 

Paul... were they made by A/C or Stewart Warner?
I have seen many stewart warner ones on ebay... sometimes they are sold at a more than fair price.

Re: Needed - Speedo Adapter P/N 6476736
 

I think this one is made by AC and is the 90 degree design. The Stewart Warner box is an inline offset design.

Paul

Re: Needed - Speedo Adapter P/N 6476736
 

Are you looking for a 90* adaptor or straight thru????
Are you looking for one that changes speedo ratio or is 1.000 to 1.000????
Are you looking for AC or Stuart-Warner???
I have several of each that I just thru in the solvent tank to clean up, will get some pictures later tonight or tomorrow... Crash

Re: Needed - Speedo Adapter P/N 6476736
 

I believe it is the 90 degree AC adapter stamped with P/N 6476736. The ratio is something like .844 or .744:1 reducing the speed from the driven gear on the tranny to the speedo cable.

Paul

Re: Needed - Speedo Adapter P/N 6476736
 

This is the exact one I need. Thanks,

http://i3.photobucket.com/albums/y86...86/Adapter.jpg

Paul

Re: Needed - Speedo Adapter P/N 6476736
 

Paul, I have 3 of that style, but the closest I get is 6476735 with a ratio of 1: .824 ...
I don't believe these are AC parts, I have AC ones with AC cast into the aluminum housing,,, but I could be wrong... Crash

Re: Needed - Speedo Adapter P/N 6476736
 

Check with this seller "bad_._juju" on eBay -- he's got a couple of speedo adapters listed and probably has more "in the back". His real name is Roger Kennedy from Puyallup WA, has tons of neat stuff, mostly Camaro and vintage speed.

COPO Yenko Stewart Warner Speedo Gear Reduction Box

Re: Needed - Speedo Adapter P/N 6476736
 

Here are pictures of the Speedo Adapters. Crash

Re: Needed - Speedo Adapter P/N 6476736
 

More pictures