The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   pontiac head conversion (https://www.yenko.net/forum/showthread.php?t=70876)

funace 03-23-2002 09:26 PM

pontiac head conversion
 
i have a 1978 pontiac 400 HO. it came with 6X heads. i have been told that they are a 101 cc head.
i want to get the most performance with spending the least amount of money. i also do not want to exceed
a 10:1 compression ratio. what i have been told to do is get a set of heads with a 72 cc combustion chamber
and that will boost my compression ratio and give me much greater performance.

if i should do this what heads should i use? and am i going to be able to get them at a salvage yard?

also i wanted to know if any of the hardware from the 1978 6X heads would swap out into any other pontiac
heads with smaller combustion chambers. i do not want to just get rid of my 6X heads because i put around
$400 into them about 2 years ago.

my last question is should i just drop the compression increase idea and buy a edelbrock intake or a
performace ignition?

Any help will be much appreciated!

Chris396 03-24-2002 12:35 AM

Re: pontiac head conversion
 
Try this site.

http://performanceyears.com/cgi-bin/...ultimatebb.cgi

Rick 03-24-2002 02:29 AM

Re: pontiac head conversion
 
72cc Pontiac head castings:
1967 number: 670
1967 number: 97
1968 and 1969 numbers: 62 and 16
1968 number: 31
1969 number: 48
1970 numbers: 12 and 13


bird of a different motor 03-28-2002 09:37 PM

Re: pontiac head conversion
 
1969 16's and 62's will work also


All times are GMT. The time now is 11:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.