BBC Water Pump Bypass Fitting
 

Is there any kind of special tool made for removal and/or installation of the water pump bypass hose fitting in a big block Chevy? This fitting has a slot in the one end, and I'm sure many (if not most)of these fittings have had a large screwdriver used for installation.....but the potential for damage or distortion of the fitting end would seem to make this a less-than-ideal choice.

Trying to remove an old one from a water pump that has been used for years is 'mission impossible' with a big screwdriver. A huge vise-Grip or ChannelLock pliers would undoubtedly work, but would also destroy the fitting. Any suggestions?

Re: BBC Water Pump Bypass Fitting
 

heat -- heat -- heat ... last resort, slide a piece of round stock or a socket of the correct size inside the fitting and use a vise grips. Any damage will be covered by hose when installed and not evident. TAZ

Re: BBC Water Pump Bypass Fitting
 

A really large screwdriver (like 24" long!) worked perfectly for me....

Re: BBC Water Pump Bypass Fitting
 

OK Marlin -- you started it ... I've used a flat end tire tool that I ground down to fit the slots. Used a a large adjustable end wrench to turn tool ... TAZ

Re: BBC Water Pump Bypass Fitting
 

Bill,
If you have an old socket you'd sacrifice, find one that is a close fit around the fitting, cut two slots in it, then place a flat piece of steel in the slots that fits into the notches in the hose fitting.

Verne

Re: BBC Water Pump Bypass Fitting
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Verne_Frantz</div><div class="ubbcode-body">Bill,
If you have an old socket you'd sacrifice, find one that is a close fit around the fitting, cut two slots in it, then place a flat piece of steel in the slots that fits into the notches in the hose fitting.

Verne</div></div>


Good idea!

Re: BBC Water Pump Bypass Fitting
 

There were several socket to adjust the tie rod ends on early Chevrolets, probably other cars also. I bought some on e-bay for cheap...Joe

Re: BBC Water Pump Bypass Fitting
 

X-2 I use a &quot;Drag Link Adjusting Socket&quot; for heavy duty trucks.

Bill

Re: BBC Water Pump Bypass Fitting
 

Great ideas, everyone....thanks to all who have responded [img]<<GRAEMLIN_URL>>/worship.gif[/img]

Re: BBC Water Pump Bypass Fitting
 

Big Block Bill,

That looks like exactly what I need.....checking into one on eBay right now!