427 GM Deep Performance Oil Pan - 6 quart GM #3879633

[RALLY]

Very sorry i didn't get back to you. I am going over to my garage and check on the oil pump pick up/screen. I will take pictures and send them. Send me your email address in a PM message.

[68 DANA]

Thanks Rally for the oil pick up tube! Still on the hunt for the oil pump and an additional oil pan.

[RALLY]

Good luck with your hunt for those parts. Glad i could help some.

[ronzz572]

I may have a nos pan, also the pump and tray. I bought out a deceased drag racers parts. I do believe I have the pan. But need to check the other parts tomorrow.

[68 DANA]

Originally Posted by ronzz572

I may have a nos pan, also the pump and tray. I bought out a deceased drag racers parts. I do believe I have the pan. But need to check the other parts tomorrow.

Thanks for checking!

[ronzz572]

This is all I can get tonight. The pan I think is correct. The pumps sump and trays I have to check through. Tried to load a picture, but to large. Going to retry again.

[blackss69]

I have a NOS oil pan still painted orange. I do not have the original box. I also have the curved windage tray (NOS _258451). I think I have a NOS HD oil pump and screen (the screen has been removed). Also have the studs, etc. I also have the flat Corvette tray 3967854. Let me know if you are interested. I will take pictures if you are interested.

[68 DANA]

NOS oil pan, windage tray and corresponding oil pump have been found!

[Hawkeye]

Congratulations!!! Did you also get the studs for the windage tray.
I would like to know the length of them. Also if you could post some photos that would be great.
Thanks,
Marty

[RALLY]

Originally Posted by 68 DANA

NOS oil pan, windage tray and corresponding oil pump have been found!

That oil pan did not use the flat Corvette Windage tray. It used the curved windage tray 3879640. This is the correct windage tray number. I use to own 3 windage trays for this 633 oil pan.