![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
Here's a diagram from my web site taken from the assembly manual. http://ca.geocities.com/1970z28@roge.../orange_05.jpg
Whomever the GM Engineer was who drew the diagram wasn't too accurate, but the dimensions are correct. The stripes should not be close to the emblem and the other side should be close to the backup lights. When you measure it out the letter a in Camaro on the decklid should be between on the green in between the wide black and 1/4" black stripe. http://ca.geocities.com/[email protected]_rear_dim.jpg ![]() Just like to see guys stripe the Z28 out there correctly.
__________________
1970 Z28 M22, 3.73, Z21, Z87 |
#12
|
|||
|
|||
![]()
oops, it's the bottom part (middle) part of the letter M that will be on your green part of the stripe on the Camaro emblem on the decklid.
__________________
1970 Z28 M22, 3.73, Z21, Z87 |
#13
|
|||
|
|||
![]()
Here is a reference picture of my original paint 70Z.
Jack ![]()
__________________
Jack Seymour 1970 Z28 Hugger Orange 20K Mile Survivor |
#14
|
|||
|
|||
![]()
Jack,
Yes that is the way they did it. Do not touch that car, someone has to keep a benchmark, might as well be you! Phil ![]() |
![]() |
|
|