Dragmaster International Wheels - Page 2

**Steve Shauger** · #11 08-28-2004, 06:13 PM

I believe they would work just fine.

TDW · #12 09-14-2004, 07:42 PM

SK...I have the wheels. The guy that had them did not measure the right way. They are 15x6, with 2 7/8 backspace. They clear the 4 piston calipers. One has some small curb rash. All have old mounting compound on them. They will need to be cleaned and painted. No lugnuts and 2 caps missing. All lug holes and cap holes are good. Do you know what the backspace is on the Atlas wheels? It looks like these will fit pretty good. Now I need to figure out some tires. Any suggestions?.Thanks...

**Steve Shauger** · #13 09-14-2004, 08:07 PM

I am using 215/70/15 TA's

TDW · #14 09-15-2004, 02:25 PM

Paceme...Thanks. Do you know of any other brand of caps that will fit? I tried the TTD ones, and the bolt pattern is different. Thanks.

camarojoe · #15 09-15-2004, 03:19 PM

Caps for vintage americans fit. The only caps that have an oddball bolt pattern are the caps for the new style torq thrust D's. Virtually all of the vintage 5 spoke torq thrust copies used caps with the same hole pattern for the 5 attaching screws. You can buy brand new chrome plated plastic ones on ebay for around 30.00-40.00 for a full set.

TDW · #16 09-15-2004, 05:35 PM

Thanks Joe. I will look around.

TDW · #17 09-16-2004, 02:49 AM

I found a new set. Belair, TTT had them. Thanks everybody that responded.

Belair62 · #18 09-16-2004, 04:33 AM

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.