57 Nomad Project.........

[earntaz]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: earntaz</div><div class="ubbcode-body">Ken -- I hope you don't take this as being too critical ... but the aircraft locknuts (nylocks) in the brake assembly do not appear to be engaging the nylon. Bolts appear to be a skoshi too short. For safety sake -- check it out. TAZ </div></div>


Everything was disassembled to get the axles out and the nuts were just screwed on with a couple threads (Just so I wouldn't lose them till reassembly)........Good Eye ......LOL


Ken</div></div>

With the work done to that motor, you've got to make sure your nuts are tight before climbing behind the wheel ... [img]<<GRAEMLIN_URL>>/burnout.gif[/img]

[WILMASBOYL78]

When do you have time for your day job [img]<<GRAEMLIN_URL>>/hmmm.gif[/img]

wilma

[kwhizz]

Been busy at the shop so not a lot of time for Car parts......I finally got the fuel pump situation put to bed........I ordered a set-up from Ricks that has a dual filtered in tank pick ups for supplying the fuel pump......there are a couple of brackets that the pick-ups snap into that needed to be tack welded in the Tank to hold them in position......Got that finished today........Now I can finish welding the Pump plate into the tank.........Getting real close !!!!!!!

[Xplantdad]

Nice!!

[VintageMusclecar]

Ken, watching you build these projects is like watching Fred Astaire dance. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

[SS427]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VintageMusclecar</div><div class="ubbcode-body">Ken, watching you build these projects is like watching Fred Astaire dance. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] </div></div>

[img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

[WILMASBOYL78]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SS427</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VintageMusclecar</div><div class="ubbcode-body">Ken, watching you build these projects is like watching Fred Astaire dance. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] </div></div>

[img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] </div></div>

I always knew he was light on his feet [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]

[kwhizz]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: WILMASBOYL78</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SS427</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VintageMusclecar</div><div class="ubbcode-body">Ken, watching you build these projects is like watching Fred Astaire dance. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] </div></div>

[img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] </div></div>

I always knew he was light on his feet [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img] </div></div>



In the head also............

[Xplantdad]

Looking forward to updates after Mickey [img]<<GRAEMLIN_URL>>/smile.gif[/img]

[scuncio]

Nice, it's really coming together....