![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
#141
|
|||
|
|||
![]()
..every time I touch it I get dirty so I'm leaving it alone !
__________________
Don't mess with old farts - age and treachery will always overcome youth and skill! Bullshit and brilliance only come with age and experience. |
#142
|
|||
|
|||
![]()
The Floor Pan is just about done.....that Red Clay is a Pain to wire brush out of all the nooks and crannies....Scotch Brite tomorrow and give it a light coat of chassis black, when it gets back from the body shop I'll give it the final detailing........
![]() ![]() ![]() Ken
__________________
![]() The Best things in life......Aren't Things |
#143
|
|||
|
|||
![]()
Also .....Had a little set back today........I took the Grill Assy apart and was cleaning all of the Red Clay dust that had discolored the back side of the Grill over the years........the Grill was perfect......I used Royal Purple Degreaser and with a lot of scrubbing it cleaned up pretty good......after rinseing it off I turned it over and this is what was waiting for me
![]() The cleaner must have a mild acid base to it and it seems to have attacked the anodizing.....time to strip and re-anodize.......So if you use this stuff around aluminum ![]() Ken ![]()
__________________
![]() The Best things in life......Aren't Things |
#144
|
|||
|
|||
![]()
Ken,
What brand of chassis black are you going to use? Keep up the great work. Dan.
__________________
69 300 Deluxe Post Sedan Frost Green 69 SS396 300 Deluxe Post Sedan Lemans Blue SOLD 70 Buick Skylark Post Sedan Gulfstream Blue 70 Buick Skylark Post Sedan Burnished Saddle http://m.youtube.com/watch?v=PM3DE8qI2NY https://m.youtube.com/watch?v=Yn4xEmGypUw |
#145
|
||||
|
||||
![]()
Ken,
Don't forget to paint thinner all areas before spraying... Good looking floors and thanks for the advice on the aluminum. ![]()
__________________
Follow me on Instagram: https://www.instagram.com/mbcgarage/ |
#146
|
|||
|
|||
![]()
[ QUOTE ]
Ken, What brand of chassis black are you going to use? Keep up the great work. Dan. [/ QUOTE ] Rust-o-leum Bar-B-Que Black.......Rattle can.....works out great........Just the right amount sheen Ken ![]()
__________________
![]() The Best things in life......Aren't Things |
#147
|
|||
|
|||
![]()
Ken,
If there was slight surface rust in the nook and crannies, like between spot welded floor supports, I'd suggest spraying a rust converter, like Permatex Extend in all those areas. It will convert the iron oxide into iron sulfate (black), which will never again allow moisture or oxygen to reach the hidden metal. You can paint right over top of it, no prep. Verne |
#148
|
|||
|
|||
![]()
[ QUOTE ]
Ken, If there was slight surface rust in the nook and crannies, like between spot welded floor supports, I'd suggest spraying a rust converter, like Permatex Extend in all those areas. It will convert the iron oxide into iron sulfate (black), which will never again allow moisture or oxygen to reach the hidden metal. You can paint right over top of it, no prep. Verne [/ QUOTE ] Verne......What looks like rust is actually the residual red dirt from the area that the car came from....there is some very light surface rust and I'll be wiping everything down with Metal Prep that I got from the Local "Strip Right" dealer just to be sure...... ![]() Thanks Ken ![]()
__________________
![]() The Best things in life......Aren't Things |
#149
|
||||
|
||||
![]()
Ken...Looking great!
![]()
__________________
Bruce Choose Life-Donate! |
#150
|
|||
|
|||
![]()
Looks real good Ken. But man what a lot of work
|
![]() |
|
|