Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Yes...that's what happens. There is also a strong spark when you reconnect the positive cable to the battery terminal. I notice a little spark with the other cars, but this is much stronger. Something must be on our shorting out somewhere....everything works fine on the car...no problems
![]()
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro |
|
#2
|
|||
|
|||
|
1st of all never take the pos. cable loose from a battery 1st. If you take the ground loose 1st and your wrench hits ground there is no sparks. If you take the pos. loose 1st and hit ground you have a arc welder.
Anything that stores voltage (condensor, possible radio capistors etc.) can cause a spark as you mentioned. Anything drawing any voltage at all (alternator, clock etc) can cause a spark when connecting battery back.
__________________
20 foot 75 hp good time at the lake |
|
#3
|
||||
|
||||
|
Don't yell at me...I'm just a country boy
anyway, my friend Sam Scardino handles my protection...you know how Italians are Thanks for the input..I will try neg first and see what happens... ![]() wilma
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro |
![]() |
|
|