RogerD's 1969 Dick Harrell Chevelle

[olredalert]

-----Sounds like a great neighborhood, Roger!!!......Bill S

[RogerD]

Good morning Gang:

I've hit a snag . . .

Need your help to locate a 1969 Chevelle Coupe rear seat (back and seat cushions)
Metal must be in VG condition - don't care about the covers.
Please PM me if you have one or know of one I can buy!!

Thanks

[Mr70]

As long as you don't care about the seat covers,any 1968-72 GM A-body backseat will fit..Chevelle-Monte Carlo-Skylark-Cutlass-Lemans.
Here's one on the bay.. http://cgi.ebay.com/ebaymotors/1970-1971...sQ5fAccessories

[RogerD]

The rear seat back and lower I have (been told it's 70 ~72 A body) is too narrow.
Measures about 56" across the lower edge at the front.
The rear seat out of my 69 donor car (it's rotted out and not good enough to fix) measures right at 60" across that same point.

Thanks

[volspeed1970]

Actually that seat will not fit as the 70-72 models have the armrests that go to the floor so the seats are narrower. He needs one from any 68-69 A-body except Grand Prix's, 4-doors, and convertibles.

[Mr70]

I know,but didn't know how particular you wanted to be.
A 1970-72 rear seat will fit into a 68-69 with a lil wiggle room,but a 68-69 rear seat is too tight for 70-72.
You could post a wanted ad in the wanted section for quicker results.

[69Tom]

Roger, I have a rear seat from a 1968 442, out of a CA car. Light surface rust on the frame. PM me if you're interested. Located in Phoenix.

[RogerD]

Good news - located a seat and have made arrangements to get it on the way - THANKS Tom

[69Tom]

No problem Roger. My pleasure helping you get a great car back together again. Will speak soon...!

[Xplantdad]

Awesome!