Is "stance" important?

[Xplantdad]

Are you in town? We have Cruise on Central tomorrow....

[mockingbird812]

Will be in 7.5 hrs. Yes, I know about cruise, not sure I will go but I plan on being at Pavillions from. 2-6.

[Xplantdad]

Alright...maybe we'll have to get to Pavillions after the cruise on central then [img]<<GRAEMLIN_URL>>/smile.gif[/img]

Sam needs to do a few headlight shots :P

[mockingbird812]

[img]<<GRAEMLIN_URL>>/naughty.gif[/img] tis that time of the year. Warming temps bring the headlights out from the winter darkness!

[Xplantdad]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mockingbird812</div><div class="ubbcode-body"> [img]<<GRAEMLIN_URL>>/naughty.gif[/img] tis that time of the year. Warming temps bring the headlights out from the winter darkness! </div></div>


Yes it do!

[ss427copo]

Mmmm? A stance of another topic? What started out as a little cleanup under the hood, now my wife says,&quot; hon, I don't want to know how much $$' but will you stop rolling around under the Camaro? New brakes, new SS lines, new shocks sprayed semi-gloss grey, a correct US stamped NOS master cylinder, striped the rear to find a BX rear, a bunch of wire color corrections, a new 850 carb and new valve springs which should REALLY wake her up after 20 years of 700lbs of valve cycles....getting ready for June @ Carlisle.

[ANDY M]

The beast is back. Just needs a little cleaning up, and some maintenance. [img]<<GRAEMLIN_URL>>/sick.gif[/img]

[Lynn]

Stance IS important.

So is camera angle.

Please ignore the paint. Has been polished in a couple places, wet sanded and unpolished in others, and still completely uncut in others.
Hoping to paint stripes this week, then sand the whole car and have it buffed.
The following 3 shots were all taken within seconds of each other. No changes made to the car. The car in reality sits 5/8 inch lower in the front. Factory Z/28 would sit .38 inch higher in the front (of course, the AIM calls ro +- .38, so who knows).

From some angles the car actually looks lower in rear, and some it looks way higher in the rear.
Original size tires on the car for now. I have the YH wheels for it, but these are FW. Still need to blast and paint the YH wheels.
BTW, I also like the stance on my old 306,000 mile bimmer in the back ground on shot #3.

[Tracker1]

I think you nailed it Lynn. Nice job.

[427TJ]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lynn</div><div class="ubbcode-body">Stance IS important.

So is camera angle. </div></div>

I prefer a low rear-quartering shot: